By default, all switches are configured to be VTP servers. This configuration is suitable for small-scale networks in which the size of the VLAN information is small and the information is easily stored in all switches (in NVRAM). In a large network, the network administrator must make a judgment call at some point, when the NVRAM storage that is necessary is wasteful because it is duplicated on every switch. At this point, the network administrator must choose a few well-equipped switches and keep them as VTP servers. Everything else that participates in VTP can be turned into a client. The number of VTP servers should be chosen in order to provide the degree of redundancy that is desired in the network.
VLAN is a software concept, identifiers and configurations for a VLAN must be properly prepared for it to function as expected. Frame coloring is the process used to ensure that VLAN members or groups are properly identified and handled. With frame coloring, packets are given the proper VLAN ID at their origin so that they may be properly processed as they pass through the network. The VLAN ID is then used to enable switching and routing engines to make the appropriate decisions as defined in the VLAN configuration.If the VLAN is not properly configured that part of the network will be down.
No comments:
Post a Comment